![]() Be sure and use tabs so the remaining stock is attached to the part. In your top setup do all your tool paths and then add a drill tool path at the sketch points. Select Acramatic/acramatic under the post configuration, then select where to save the G-Code file and the file name, finally click on Post.The easiest way is to create a sketch on the top surface of the part and create at least two sketch points where you will drill dowel holes in the stock (not the part).Right click on your project setup, click on Post Process.In the Project window, select Passes tab and enter the reuired tolerance, this will effect the program size, running time, and accuracy.The selected tool path will be shown in Bold. In the Project window, select Geometry tab and click on Nothing under the curve Selections, then select the desired tool path on the 3D Model surface.In the Project window, select Disable under Coolant type.In the Select Tool window, select the newely created tool and click ok.Select the tool type, unit, and enter the tool geometry information, then click ok.In the Select Tool window, click on the required tool type.In the Project window, click on Tool select. ![]() (Note : This tuturial will use 3D->Project as an example). From the CAM bar, select the required machining task under 2D, 3D.etc.Click on the Stock Point under the Work Coordinate System section to specify your part zero locationĬlick on the required part zero location, then click ok.From the Setup window, select the Operation Type, then click on the Nothing under the model section and click on your 3D model to select it.Click on Setup icon to set your model configuration (part zero, tolerance.etc).From the DESIGN menu, click on MANUFACTURE.Robot Drivers Development (Robot Movement Interface)Īutodesk Fusion 360 may take some time to import and open the 3D model File. define multiple grids in a grid structure
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |